When encountering the projects that have been constructed, it is found that the adhesion of putty on the exterior wall is poor, the following methods can be adopted to improve the adhesion of putty:
1. Watering maintenance method to improve the adhesion of putty
The main component of putty for exterior wall is cement, which will increase the strength when encountering water. Therefore, after the construction of putty for exterior wall is completed, the putty can be cured by rolling or spraying water to improve the adhesion of putty.
2. Transparent penetrating primer improves the adhesion of putty
Once it is found that the external wall putty has poor adhesion, colored alkali resistant sealing primer shall not be used. Transparent sealing primer shall be used. Compared with colored primer, transparent sealing primer has better permeability, which can strengthen the external wall putty and improve the putty adhesion.
3. Adding water properly to sealing primer to improve the adhesion of putty
During the construction of many projects, the primer is directly used after the barrel is opened, which will affect the permeability of the primer; the reasonable way is to add water to dilute the sealing primer properly, so that the primer can penetrate into the putty base, so as to improve the adhesion of the putty on the exterior wall.
4. The adhesion of putty can be improved by avoiding direct sunlight on the wall during primer construction
Especially in summer, the temperature of the wall in direct sunlight is very high, and the primer will form a film soon after roll coating, which can not penetrate into the base layer of the outer wall, resulting in poor adhesion. On the contrary, avoid the wall in direct sunlight, and add more water to the primer properly, so that the primer can fully penetrate into the base layer of putty, which will improve the adhesion of putty.
Hebei HaoShuo Chemical Co., Ltd. Hydroxypropyl methyl cellulose
Previous: Laboratory overview
Next: Dissolution Method
Related News and Blogs
24
Aug., 2024
Let's meet Indonesia Coatings Exhibition 2024
The 10th Paintistanbul & Turkcoat Fair will be held at the Istanbul Exhibition Center in Turkey from May 8th...
19
Nov., 2021
What Causes A Cracked Putty Layer?
The one-off scraping thickness of the putty is directly proportional to the curing shrinkage strength, which increases in proportion to the tendency of the putty to crack.
04
Nov., 2021
Whether you are carrying out small repairs or building walls, knowing how to mix the mortar needs to be precise. If the mortar is too dry, the blocks will not stick together properly. If it is too wet, flowing mortar can spill out of the joints, resulting in wasted time and materials for clean-up.
25
Oct., 2021
The Effect of Winter Construction Temperature on Tile Adhesives
As we all know, tile adhesive is generally made from cement and mixed with various additives. It is mixed with water at the construction site and then applied to the wall or floor.
Get in Touch
Interested in how our HPMC can enhance your personal care formulations? Contact us to request a free sample and experience the superior quality of our cellulose ether products.