As a Tile Adhesive Manufacturers, share with you.
Hydroxypropyl methyl cellulose HPMC is used as a dispersant, thickener and binder in construction treatment, and is mainly used in the molding of cement mortar and gypsum products. It is used in cement mortar to increase its adhesion, reduce flocculation, improve viscosity and shrinkage, and have water retention. Reduce the moisture loss and strength of the concrete surface, prevent cracks and weathering of water-soluble salts; hydroxypropyl methyl cellulose HPMC has thixotropy and can be formulated for low-fluidity, one-time thick coating of mortar paint on vertical walls; HPMC has improved adhesion and construction performance, so it is suitable for the preparation of easy-flowing spraying mortar for thin-layer painting.
HPMC for Tile Adhesive
The amount of hydroxypropyl methylcellulose HPMC in building materials is very small, only 0.1%~1%, but its effect is great, and it can be used as a plasticizer, tackifier, and water-retaining agent for paint, plaster, mortar and cement products. Agents, air-entraining agents and retarders, play a role in increasing its workability, water retention or adhesion with the base layer. In addition, it is also in response to environmental protection requirements. When dry-mixing mortar, it avoids unstable performance and pollution to the surrounding environment caused by on-site mixing, poor construction environment, and low flow efficiency. In the past, tile adhesives and internal and external wall putties used more than 107 adhesives. From an environmental protection point of view, the application of cellulose ethers, such as HEC and HPMC, is ideal.
Cement has good bonding performance, but due to the difference in performance and conditions between the bonding layer and the bonded surface during the construction process, the bonding performance of cement mortar and cement mortar is significantly different. When the water absorption performance of the bonding surface is large, it will Cause the dehydration of the bonding surface, the plasticity of the cement mortar is greatly reduced, the adhesion force is reduced, and the bonding strength is greatly reduced. In the past, gypsum or 107 glue was added to the cement mortar, but there are still some defects such as inadequate measurement and cumbersome construction techniques. The viscosity-increasing effect of cellulose ether in water and weak alkali.
Our company also has HPMC for Tile Adhesive on sale, welcome to contact us.
Related News and Blogs
24
Aug., 2024
Let's meet Indonesia Coatings Exhibition 2024
The 10th Paintistanbul & Turkcoat Fair will be held at the Istanbul Exhibition Center in Turkey from May 8th...
19
Nov., 2021
What Causes A Cracked Putty Layer?
The one-off scraping thickness of the putty is directly proportional to the curing shrinkage strength, which increases in proportion to the tendency of the putty to crack.
04
Nov., 2021
Whether you are carrying out small repairs or building walls, knowing how to mix the mortar needs to be precise. If the mortar is too dry, the blocks will not stick together properly. If it is too wet, flowing mortar can spill out of the joints, resulting in wasted time and materials for clean-up.
25
Oct., 2021
The Effect of Winter Construction Temperature on Tile Adhesives
As we all know, tile adhesive is generally made from cement and mixed with various additives. It is mixed with water at the construction site and then applied to the wall or floor.
Get in Touch
Interested in how our HPMC can enhance your personal care formulations? Contact us to request a free sample and experience the superior quality of our cellulose ether products.