The main application of HPMC in building materials:
One: Cement based plastering
(1) Improve the uniformity, make the plastering easier to trowel, improve the anti hanging property, enhance the fluidity and pumping property, and improve the working efficiency.
(2) It has high water retention, prolongs the placing time of the mortar, improves the working efficiency, and is conducive to the hydration and solidification of the mortar to produce high mechanical strength.
(3) Control the introduction of air, so as to eliminate the cracks on the coating surface and form an ideal smooth surface.
Two: Gypsum based plastering and gypsum products
(1) Improve the uniformity, make the plastering easier to trowel, improve the anti hanging property, enhance the fluidity and pumping property, and improve the working efficiency.
(2) It has high water retention, prolongs the placing time of the mortar, improves the working efficiency, and is conducive to the hydration and solidification of the mortar to produce high mechanical strength.
(3) Control the consistency of mortar to form an ideal surface coating.
Three: Masonry mortar
(1) Enhance the cohesiveness with the masonry surface, enhance the water retention, and improve the strength of mortar.
(2) Improve the lubricity and plasticity, improve the constructability; use the mortar improved by cellulose ether, easier to construct, save the construction time and reduce the construction cost.
(3) The super high water retention cellulose ether is suitable for the high water absorption brick.
Four: Plate joint filler
(1) Excellent water retention, extended opening time and improved work efficiency. High lubricant, easy to mix.
(2) Improve the anti shrinkage and anti cracking properties, and improve the surface quality of the coating.
(3) Improve the adhesion of the bonding surface and provide a smooth and smooth texture.
Five: Tile adhesive
(1) It is easy to dry mix ingredients without agglomerates, improve application speed, improve construction performance, save working time and reduce working cost.
(2) By extending the opening time, the tiling efficiency is improved, and the excellent adhesion effect is provided.
Six: Self leveling ground material
(1) Provide viscosity, which can be used as anti settling agent.
(2) Enhance the pumping performance of liquidity and improve the efficiency of floor laying.
(3) Control the water retention and shrinkage, and reduce the cracking and shrinkage of the ground.
Seven: Waterborne coatings
(1) Prevent solid precipitation and extend the container period of products. High biological stability, excellent compatibility with other components.
(2) Improve the fluidity, provide good splash resistance, sag resistance and leveling, and ensure good surface finish.
Eight: Wallpaper powder
(1) fast dissolving without agglomerates is conducive to mixing.
(2) provide high bond strength.
Nine: Extruded cement sheet
(1) It has high cohesiveness and lubricity, and enhances the processability of extruded products.
(2) Improve the strength of green slab, promote the hydration curing effect, and improve the yield.
Ten: HPMC products for ready mixed mortar
The special HPMC product for premixed mortar has better water retention than the common product in premixed mortar, which ensures the inorganic cementitious material to be fully hydrated, significantly prevents the reduction of bonding strength caused by drying too fast and the cracking caused by drying shrinkage. HPMC also has a certain air entraining effect. The special HPMC product for premixed mortar can increase the strength and troweling of premixed mortar due to its proper air entraining, uniform air entraining and small bubbles. The special HPMC product for premixed mortar has a certain retarding effect, which can extend the opening time of premixed mortar and reduce the construction difficulty. Hydroxypropyl methylcellulose (HPMC) is a kind of non-ionic cellulose ether, which is made from natural polymer cellulose by a series of chemical processes. They are odorless, tasteless and nontoxic white powders that swell into clear or slightly turbid colloidal solutions in cold water. It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gel, surface, water retention and protective colloid. Hydroxypropyl methylcellulose and methylcellulose can be used in building materials, coating industry, synthetic resin, ceramic industry, medicine, food, textile, agriculture, daily chemical industry, etc.
Hebei HaoShuo Chemical Co., Ltd. HPMC
Previous: Technical Data Sheet
Next: FAQ
Related News and Blogs
24
Aug., 2024
Let's meet Indonesia Coatings Exhibition 2024
The 10th Paintistanbul & Turkcoat Fair will be held at the Istanbul Exhibition Center in Turkey from May 8th...
19
Nov., 2021
What Causes A Cracked Putty Layer?
The one-off scraping thickness of the putty is directly proportional to the curing shrinkage strength, which increases in proportion to the tendency of the putty to crack.
04
Nov., 2021
Whether you are carrying out small repairs or building walls, knowing how to mix the mortar needs to be precise. If the mortar is too dry, the blocks will not stick together properly. If it is too wet, flowing mortar can spill out of the joints, resulting in wasted time and materials for clean-up.
25
Oct., 2021
The Effect of Winter Construction Temperature on Tile Adhesives
As we all know, tile adhesive is generally made from cement and mixed with various additives. It is mixed with water at the construction site and then applied to the wall or floor.
Get in Touch
Interested in how our HPMC can enhance your personal care formulations? Contact us to request a free sample and experience the superior quality of our cellulose ether products.